Actuator điện Bernard Controls

Trong xu hướng tự động hóa công nghiệp, các hệ thống máy móc và thiết bị ngày càng đòi hỏi khả năng vận hành ổn định, an toàn và tối ưu chi phí. Đó là lý do các giải pháp actuator điện đóng vai trò then chốt trong việc nâng cao năng suất và độ tin cậy của hệ thống.

Bernard Controls là thương hiệu hàng đầu trong lĩnh vực bộ động lực điện và phát triển các giải pháp dựa trên sự am hiểu sâu sắc về quy trình công nghiệp và hệ thống cơ điện. Nhằm đáp ứng đa dạng nhu cầu từ tiêu chuẩn đến chuyên biệt, Bernard Controls xây dựng hai nhãn hiệu sản phẩm bổ trợ cho nhau, giúp người dùng dễ dàng lựa chọn giải pháp phù hợp với điều kiện vận hành, ngân sách và yêu cầu kỹ thuật.

Với vai trò là đơn vị phân phối chính hãng, MOG mang đến cho khách hàng tại Việt Nam đầy đủ các dòng actuator điện của Bernard Controls

First bc: The essentials

Learn More Data Sheet

94306 Vertical End Of Line Flame Arrester

  • Stop flame propagation end of the line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
Learn More Data Sheet

94307 Horizontal End Of Line Flame Arrester

  • Stop flame propagation in-line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
Learn More Data Sheet

94308 Miniature Flame Arrester

  • Small storage tanks and drums where low flash point solvents must be protected against flame from exterior sources of ignition.
Learn More Data Sheet

94309 Flame Arrester (Plate Element)

  • Quenches the flame front by cooling the flame to below its ignition temperature.
Learn More Data Sheet

94550 Combination Flame Arrester and Free Vent

  • Provides both positive flame stop and maximum venting in a compact fitting.
Learn More Data Sheet

94570 Combination Conservation Vent and Flame Arrester (2″-12″ Sizes)

  • Pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.
Learn More Data Sheet

97570 Combination Conservation Vent and Flame Arrester (2″-12″Sizes)

  • Digester Pressure/Vacuum Relief Coupled with Flame Propagation Protection
Learn More Data Sheet

97571 Combination Conservation Vent & Flame Arrester (2″-12″ Sizes)

  • Digester Pressure/Vacuum Relief Coupled with Flame Propagation Protection
Learn More Data Sheet

94580 Combination Emergency Vent and Flame Arrester

  • Emergency pressure venting as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flashpoint.

Deflagration Arresters

Learn More Data Sheet

94406 Vertical Inline Deflagration Flame Arrester

  • In-line tested to stop flame propagation that end of the line flame arresters cannot on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
Learn More Data Sheet

94407 Horizontal Inline Deflagration Flame Arrester

  • In-line tested to stop flame propagation that end of the line flame arresters cannot on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
Learn More Data Sheet

94450 Combination Deflagration Flame Arrester and Free Vent

  • Positive flame stop and maximum venting in a compact fitting.
Learn More Data Sheet

94470 Combination Conservation Vent and Deflagration Flame Arrester

  • Pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.

Detonation Arresters

Learn More Data Sheet

94311, 94312, 94313, 94314 Detonation Flame Arresters

  • Protection against flame propagation through piping runs and vapor recovery systems, while allowing maximum flow efficiencies.

any of it’s subsidiaries assume no responsibility and shall not be liable for any damage, injury or death caused by the mis-application or improper installation of the products that it provides. Installation shall be per manufacturer’s instructions in accordance to any applicable local, state or federal regulations. It is the responsibility of the purchaser to ensure these guidelines are followed and that the products are applied properly.

Precision Mechanical Processing Get a Quote

ADd a callout header here

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.